Product ID:STELLITE, 6
MSDS Date:05/12/1995
FSC:3439
NIIN:00-056-0038
MSDS Number: CFQVV

STOODY CO

BOWLING GREEN, KY 42102-9032
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 502-781-9777

Cage: 57965

STOODY CO

90032 BOWLING GREEN, KY 42102-9032 US

Telephone: 502-781-9777

Cage: 57965

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0.2-2%

OSHA PEL 5 MG/M3 DUST, C

ACGIH TLV: 5 MG/M3 DUST

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 0.2-2%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 0-5%

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

CHROMIUM (SARA 313) (CERCLA)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 25-35%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0-7%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM

NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 0-5%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

TUNGSTEN

CAS: 7440-33-7

RTECS: YO7175000

Fraction By Weight: 0-4%

OSHA PEL 0.1 MG/M3 (MFR)

ACGIH TLV: 1 MG/M3;3 STEL

COBALT (SARA 313)

CAS: 7440-48-4

RTECS: GF8750000

Fraction By Weight: BALANCE

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.02 MG/M3

WELDED, PROCESS, PROC, ELECTRODES USED,

RTECS: 9999999ZZ

OF WORK AREA, QUALITY & AMT OF VENT, POSITION OF

RTECS: 9999999ZZ

PRESENCE OF CONTAMS IN ATM. WHEN ELECTRODE IS

RTECS: 9999999ZZ

PERCENT & FORM FROM INGS LISTED. CONC MAY DECR/INCR

RTECS: 9999999ZZ

CMPDS. DECOMP PRODS OF NORM OPERATION INCL THOSE

RTECS: 9999999ZZ

THOSE FROM BASE METAL & COATING, ETC. REAS EXPECTED

RTECS: 9999999ZZ

COMPLEX OF OXIDES OF INGS, AS WELL AS CARBON

RTECS: 9999999ZZ

TO DETERM COMPOSITION & QTY OF FUMES & GASES TO

RTECS: 9999999ZZ

WELDER'S HELMET IF WORN/IN WORKER'S BRTHG ZONE. SEE

RTECS: 9999999ZZ

GENERATED BY WELDING & ALLIED PROCESSES" &

RTECS: 9999999ZZ

FOR SPECIFIC INFORMATION CONTACT NEHC .

RTECS: 9999999ZZ

FULL LGTH FSHLD W/FILTER LENS. AS RULE OF THUMB,

RTECS: 9999999ZZ

TO NEXT LTR SHADE WHICH GIVES SUFFICIENT VIEW OF

RTECS: 9999999ZZ

MUSCULAR WEAK & TREMORS SIMILAR TO

RTECS: 9999999ZZ

IS CONSIDERED CARCIN. EXPOS CAN CAUSE SCALING,

RTECS: 9999999ZZ

LUNG FIBROSIS/PNEUMOCONIOSIS; SORENESS & ITCH OF

RTECS: 9999999ZZ

INJURE EYES & BURN SKIN. HEAT RAYS (INFRARED RADIA)

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:FUMES & GASES CAN BE DANGEROUS TO YOUR
HLTH. ACUTE:OVEREXP MAY RSLT IN DISCOMFORT SUCH AS DIZZ, NAUS OR
DRYNESS/IRRIT OF NOSE, THROAT/EYES. CHROMATES PRESENT CAN CAUSE
IRRIT OF RESP SYS, DMG TO LUNGS & ASTHMA LIKE SYMPS. ING 6 CAN
CAUSE METALLIC TASTE, NAUS, TIGHTNESS IN CHEST, FEVER & ALLERGIC
RXNS. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL:IARC MONO, VOL 49, PG 257,
1990:GRP 2B. NTP 7TH ANNUAL RPT ON CARCINS, 1994:ANTIC TO BE
CARCIN. ANIMAL: (SUPDAT)
Effects of Overexposure:HLTH HAZ:ING 1 MAY CAUSE FLU LIKE SYMPS (METAL
FUME FEVER). FLUORIDES CAN CAUSE PULM EDEMA BRONCH. SHIELDING GASES
SUCH AS ARGON, HELIUM & CARBON DIOXIDE ARE ASPHYS & ADEQ VENT MUST
BE PROVIDED. CHRON IC:OVEREXP CAN LEAD TO SIDEROSIS (IRON DEPOSITS
IN LUNG) & AFFECT PULM FUNC. ING 1 MAY AFFECT CNS. SYMPS INCL (ING
22)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:CALL FOR MEDICAL AID. EMPLOY FIRST AID TECHNIQUES RECOMMENDED
BY THE AMERICAN RED CROSS. INGEST:CALL MD IMMEDIATELY .
INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP) .
EY ES:IMMEDIATELY FLUSH W/POTABLE WATER FOR A MINIMUM OF 15
MINUTES, SEEK ASSISTANCE FROM MD . SKIN:FLUSH W/COPIOUS AMOUNTS OF
WATER. CALL MD .

Flash Point:NONFLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE
COMBUSTIBLES & FLAMMABLES. REFER TO ANSI Z49.1 FOR FIRE PREVENTION
DURING USE OF WELDING & ALLIED PROCEDURES.

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:TRAIN WELDER TO KEEP HIS HEAD OUT OF
FUMES. TRAIN WELDER NOT TO TOUCH LIVE ELECTRICAL PARTS & TO
INSULATE HIMSELF FROM WORK & GROUND.
Other Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS & PREC LBL ON
PROD. SEE ANSI Z49.1, "SFTY IN WELDING, CUTTING & ALLIED
PROCESSES", PUBLISHED BY AWS, 550 NW LEJEUNE RD, MIAMI, FL 33126 &
OSHA PUBLICATION 2206 (29 CFR 1910), U.S. GOVT PRINTING (SUPDAT)

Respiratory Protection:USE NIOSH APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOCAL EXHAUST AT ARC, OR BOTH, TO KEEP
FUMES & GASES BELOW TLV'S IN WORKER'S BREATHING ZONE & GEN AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS &(ING 20)
Other Protective Equipment:ANSI APPRVD EYE WASH FOUNTAIN & DELUGE
SHOWER . WEAR HEAD, HAND & BODY PROT WHICH HELP TO PVNT INJURY
FROM(SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLAN OF CARCIN:LUNG, NASAL CAVITIES. COBALT:IARC MONO, VOL 52, PG
363, 1991:GRP 2B. ANIMAL:PULM FIBROSIS (BLOOD EFTS). OTHER
PREC:OFC, WASHINGTON, D.C. 20402 FOR MORE DETAILS. OTHER PROT
EQUIP:RADIA , SPKS & ELEC SHOCK. THIS MAY INCL ARM PROTECTORS,
APRONS, HATS, SHOULDER PROT, AS WELL AS DARK SUBSTANTIAL CLTHG.

Appearance and Odor:TUBULAR WIRE CONTAINING ALLOYS & MINERALS.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY OF BOTH ARE DEPENDENT UPON
METAL BEING (ING 9)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
W/FEDERAL, STATE & LOC AL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.